vPundit

In this post, let's quickly go through the steps which you need to follow to enable the vSAN File Services. You can enable vSAN File...

File services is a common requirement in today’s enterprise environments. Historically, providing these file-level services meant using...

In the last blog, we discussed about the different options which are available when working with Maintenance mode in vSAN Cluster. In...

Before you shut down, reboot, or disconnect a host that is a member of a cluster, you must put the host in maintenance mode to avoid...

In this section, we will discuss the behavior of the vSAN Stretched Cluster when various failures occur. Understanding failure scenarios...

In this previous blog, we discussed about configuring a stretched cluster manually. Let's talk more about converting the stretched...

In this blog post, let's quickly go through the steps which we need to follow to configure a vSAN Stretched Cluster manually. Please make...

In a previous blog, we talked about vSAN Stretched Clusters. In this blog, let's discuss more about some best practices and design...

As the name suggests, stretched clusters extend the vSAN cluster from a single data site to two sites for a faster level of availability...

The vSAN witness appliance OVFs are also used for shared witness. When using a vSAN Witness Appliance, the size is dependent on the...

As previously discussed, a vSAN Witness Host can be configured as either physical ESXi host or vSAN Witness Appliances. In this blog we...

Welcome back to the blog. In one of the previous blog post we discussed that the VMware vSAN 2 Node Clusters require a vSAN Witness Host...

We discussed about 2 node vSAN cluster in the last post. Let's look at a few key design factors for a 2 node vSAN cluster in this...

The vSAN 2 Node configuration was introduced in vSAN 6.1. A vSAN 2 Node Cluster is a specific configuration implemented in environments...

In previous blog we discussed about Fault Domains in vSAN Cluster. In this blog, let's have a look at how to create a new fault domain in...